Honda CR-V 1998 Reference Owner'S Manual Download Page 77

Page: 77 / 300

Keys and Locks, Seats

Glove Box

Open the glove box by pulling the
bottom of the handle. Close it with a
firm push. Lock or unlock the glove
box with the master key.

Front Seat Adjustments
Seepages

—

for important safety

information and warnings about how to

properly position seats and seat-backs.

Adjust the seat before you start

driving.

CONTINUED

Instruments and Controls

An open glove box can cause

serious injury to your passenger

in a crash, even if the
passenger is wearing the seat
belt.

Always keep the glove box

closed while driving.

Summary of Contents for CR-V 1998













































































































































































































































































































Search results

Summary of Contents for CR-V 1998

Reviews:

Related manuals for CR-V 1998

Brands by name

Popular brands

Honda CR-V 1998, Reference Owner'S Manual

Search results

Summary of Contents for CR-V 1998

Reviews:

Related manuals for CR-V 1998

Brands by name

Popular brands