83
STARTING THE ENGINE
5. Check to see if the oil pressure
indicator turns ON.
If it does not turn ON, stop the engine
and perform the following
inspections.
1)Check the oil level (see page 59).
2)If the oil level is normal and the oil
pressure indicator light does not
turn ON, consult with an
authorized Honda outboard motor
dealer.
6. Warm up the engine as follows:
Above 5°C (41°F)
–
run the engine
for at least 3 minutes.
Below 5°C (41°F)
–
run the engine
for at least 5 minutes at approx.
2,000 min
-1
(rpm).
Failure to completely warm up the
engine will result in poor engine
performance.
If the engine is not properly
warmed-up before raising the
engine speed, the warning buzzer
and overheat indicator may
activate and the engine speed will
be automatically reduced.
Before leaving the dock, check the
operation of the emergency stop
switch.
OIL PRESSURE
INDICATOR LIGHT
NORMAL: ON
ABNORMAL: OFF
<;DQQMࡍࠫ㧞㧜㧝㧟ᐕ㧝㧜㧝㧤ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧟㧟ಽ
Summary of Contents for BF100A
