Honda AQUATRAX F-12X, Owner'S Manual

Page: 177 / 292

169
1
Servicing Your Honda
169
7. Apply a thin coat of engine oil to the
rubber seal (6) of a new oil filter.
(6) oil filter rubber seal
8. Install the new oil filter and tighten it by
hand.
9. Using an oil filter wrench attachment and a
torque wrench, tighten the new oil filter to
the specified torque:
20 lbf
·
ft (26 N
·
m, 2.7 kgf
·
m)
10. Install the oil drain pipe cap.
Add Engine Oil:
11. Fill the oil tank with the recommended oil
slowly ( page 160 ).
If the oil filter was replaced, use
approximately:
• ARX1200T3DX/T3
4.5 US qt (4.3 R )
• ARX1200N3
4.3 US qt (4.1
R
)
If the oil filter was not replaced, use
approximately:
• ARX1200T3DX/T3
4.4 US qt (4.2
R
)
• ARX1200N3
4.2 US qt (4.0 R )
(cont’d)
Engine Oil & Filter
(6)