Honda AFRICA TWIN Owner'S Manual Download Page 317

Page: 317 / 377

Continued

On the right side, remove the mounting

bolts and remove the brake caliper.

Support the brake caliper assembly so

that it doesn’t hang from the brake

hose. Do not twist the brake hose.

Avoid getting grease, oil, or dirt on the

disc or pad surfaces.

Do not pull the brake lever while the

brake caliper is removed.

Take care to prevent the brake caliper

from scratching the wheel during

removal.

Remove the front axle nut cap.

Remove the front axle nut.

Loosen the left axle pinch bolts.

Support your vehicle securely and raise

the front wheel off the ground using a

maintenance stand or a hoist.

20190704203539_32MKS6000_eng_BOOK Page 316 Thursday, July 04 2019 20:57:26 JST

Tyre Puncture

Removing Wheels

Troubleshooting

311

Axle pinch bolts

Front axle

nut

Front axle

nut cap

Left side

collar

Summary of Contents for AFRICA TWIN


























































































































































































































































































































































































Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands

Honda AFRICA TWIN, Owner'S Manual

Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands