Honda AFRICA TWIN Owner'S Manual Download Page 294

Page: 294 / 377

Compression Damping

CRF1100A/A2/D/D2

You can adjust the compression damping by

the adjuster to suit the load or the road

surface.

Turn the adjuster using the Standard/Phillips

screwdriver provided on the underside of the

rear seat.

P. 230

The compression damping adjuster has 12

position or more.

Turn clockwise to increase compression

damping (hard), or turn counterclockwise to

decrease compression damping (soft).

CRF1100A/D

The standard position is 9 clicks from the

maximum setting.

CRF1100A2/D2

The standard position is 7 clicks from the

maximum setting.

NOTICE

Do not turn the adjuster beyond its limits.

Adjust both left and right forks to the same

compression damping.

20190704203539_32MKS6000_eng_BOOK Page 293 Thursday, July 04 2019 20:57:26 JST

Other Adjustments

Adjusting the Front Suspension

Maintenance

288

Adjuster

Summary of Contents for AFRICA TWIN


























































































































































































































































































































































































Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands

Honda AFRICA TWIN, Owner'S Manual

Search results

Summary of Contents for AFRICA TWIN

Reviews:

Related manuals for AFRICA TWIN

Brands by name

Popular brands