Honda Accord 2022 Owner'S Manual Download Page 376

Page: 376 / 657

374

Features

Bluetooth

HandsFreeLink

Bluetooth

HandsFreeLink

(HFL) allows you to place and receive phone calls using

your vehicle’s audio system, without handling your cell phone.

Using HFL

■

HFL Buttons

Bluetooth

HandsFreeLink

Place your phone where you can get good reception.

To use HFL, you need a

Bluetooth

-compatible cell

phone. For a list of compatible phones, pairing
procedures, and special feature capabilities:

•

U.S.: Visit

automobiles.honda.com/handsfreelink/

or call 1-888-528-7876.

•

Canada: For more information on smartphone
compatibility, call 1-855-490-7351.

To use the system, the

Bluetooth

setting must be

Phone Setup

P. 379

Voice control tips

•

Aim the vents away from the ceiling and close the
windows, as noise coming from them may interfere
with the microphones.

•

Press the

button when you want to call a

number using a phonebook name or a number.
Speak clearly and naturally after a beep.

•

If the microphones pick up voices other than yours,
the command may be misinterpreted.

•

To change the volume level, select the audio
system’s

VOL

(Volume) or use the remote audio

controls on the steering wheel.

If there is no Favorite Contact entry in the system, the
pop-up notification appears on the screen.

Favorite Contacts

P. 385

(Talk) Button

(Hang-up) Button

(Pick-up) Button

(Back) Button

(home) Button

VOL

(

VOL

(

(Volume) Buttons

Left Selector Wheel

Summary of Contents for Accord 2022

















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Accord 2022

Reviews:

Related manuals for Accord 2022

Brands by name

Popular brands

Honda Accord 2022, Owner'S Manual

Search results

Summary of Contents for Accord 2022

Reviews:

Related manuals for Accord 2022

Brands by name

Popular brands