Honda Accord 2022 Owner'S Manual Download Page 158

Page: 158 / 657

Gauges and Displays

Driver Information Interface

156

strum

nt Pa

nel

■

The Driver Attention Monitor resets when:

•

The engine is turned off.

•

The driver unfastens the seat belt and opens the door while the vehicle is stopped.

■

For the Driver Attention Monitor to function:

•

The vehicle must be traveling above 25 mph (40 km/h).

•

The electric power steering (EPS) system indicator must be off.

■

Depending on driving conditions or other factors, the Driver Attention
Monitor may not function in the following circumstances:

•

The steering assist function of the Lane Keeping Assist System (LKAS) is active.

Lane Keeping Assist System (LKAS)

P. 486

•

The condition of the road is poor, e.g. the surface is unpaved or bumpy.

•

It is windy.

•

The driver is frequently operating the vehicle in an assertive manner such as
changing lanes or accelerating.

■

Customizing

You can change the Driver Attention Monitor settings. Select

Tactile And Audible

Alert

Tactile Alert

, or

OFF

Customized Features

P. 351

For the Driver Attention Monitor to function:

The bars on the driver information interface remain
grayed out unless the Driver Attention Monitor is
functioning.

Summary of Contents for Accord 2022

















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Accord 2022

Reviews:

Related manuals for Accord 2022

Brands by name

Popular brands

Honda Accord 2022, Owner'S Manual

Search results

Summary of Contents for Accord 2022

Reviews:

Related manuals for Accord 2022

Brands by name

Popular brands