Honda Accord 2022 Owner'S Manual Download Page 615

Page: 615 / 657

613

Han

lin
g the U

expected

Indicator, Coming On/Blinking

If the Low Oil Pressure Warning Appears

■

Reasons for the warning to appear

Appears when the engine oil pressure is low.

■

What to do as soon as the warning
appears

Immediately park the vehicle on level
ground in a safe place.

If necessary, turn the hazard warning lights
on.

■

What to do after parking the vehicle

Stop the engine and let it sit for
approximately three minutes.

Open the hood and check the oil level.

Add oil as necessary.

Oil Check

P. 552

Start the engine and check the low oil
pressure warning.

The warning disappears: Start driving
again.

The warning does not disappear within
10 seconds: Immediately stop the engine
and contact a dealer for repairs.

If the Charging System Indicator Comes On

■

Reasons for the indicator to come on

Comes on when there is a problem with the charging system.

■

What to do when the indicator comes on

Stop in a safe place and have your vehicle checked by a dealer
immediately.

If the Low Oil Pressure Warning Appears

NOTICE

Running the engine with low oil pressure can cause
serious mechanical damage almost immediately.

If the Charging System Indicator Comes On

If you need to stop temporarily, do not turn off the
engine. Restarting the engine may rapidly discharge
the battery.

Summary of Contents for Accord 2022

















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Accord 2022

Reviews:

Related manuals for Accord 2022

Brands by name

Popular brands

Honda Accord 2022, Owner'S Manual

Search results

Summary of Contents for Accord 2022

Reviews:

Related manuals for Accord 2022

Brands by name

Popular brands