Honda Accord 2018 Owner'S Manual Download Page 628

Page: 628 / 719

Replacing Light Bulbs

Headlight Bulbs

626

Main

tenan

Remove the hose and the holding clip using
a flat-tip screwdriver, then remove the
upper part of the window washer reserve
tank.

Check the amount of window washer
fluid is below the upper part of the
window washer reserve tank and remove
it.

Push the tab to remove the coupler.

Rotate the old bulb counter-clockwise to
remove.

Insert a new bulb into the headlight
assembly and turn it clockwise.

Insert the coupler into the connector of the
bulb.

Low beam headlights are LED type. Have an authorized Honda dealer inspect and
replace the light assembly.

■

High Beam Headlights

High Beam Headlights

High beam headlights are LED type. Have an
authorized Honda dealer inspect and replace the light
assembly.

When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.

Insert the clip with the pin raised, and push until it is
flat.

Models with LED high beam headlights

Push until the pin
is flat.

Models with halogen high beam headlights

Holding clip

Hose

Passenger side

Tab

Coupler

Bulb

Both sides

■

Low Beam Headlights

Summary of Contents for Accord 2018















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Accord 2018

Reviews:

Related manuals for Accord 2018

Brands by name

Popular brands

Honda Accord 2018, Owner'S Manual

Search results

Summary of Contents for Accord 2018

Reviews:

Related manuals for Accord 2018

Brands by name

Popular brands