Engine Oil
u
Changing Engine Oil, Cleaning Strainer Screen
60
Maintenance
3.
Turn the ignition switch off, stop the
engine and wait for 2 to 3 minutes.
4.
Place a drain pan under the drain bolt.
5.
Remove the oil fill cap/dipstick, drain bolt
and sealing washer to drain the oil.
6.
Remove the oil strainer screen cap, O-ring,
spring and oil strainer screen and let the
remaining oil drain out.
u
Discard the oil at an approved recycling
centre.
7.
Clean the oil strainer screen.
8.
Check that the oil strainer screen, sealing
rubber and O-ring are in good condition.
9.
Install the oil strainer screen, spring and oil
strainer screen cap tighten.
Torque:
20 N·m (2.0 kgf·m, 15 lbf·ft)
Sealing washer
Drain bolt
Oil strainer
screen cap
Spring
O-ring
Oil strainer screen
12 NSC110MPD-32KZLK000.book 60 ページ ２０１１年１２月１４日 水曜日 午後４時５分
