Honda 2012 Crosstour Owner'S Manual Download Page 89

Page: 89 / 435

Push and hold the rear of the
master door lock switch on the
driver’s door. You will hear a click.
Continue to hold the switch:

Until you hear another click
(after about 5 seconds) to
activate

Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.

Make sure the shift lever is in the
Park (P) position.

Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.

Make sure the shift lever is in the
Park (P) position.

Or, until you hear two more
clicks (after about 10 seconds)
to activate

Release the switch, and within 20
seconds, turn the ignition switch
to the LOCK (0) position.

driver’s door unlock

feature.

Unlocks the driver’s door or all doors
and tailgate when the shift lever is
moved to Park (P) position with the
brake pedal depressed.

Unlocks the driver’s door or all doors
and tailgate when the ignition switch is
moved out of the ON (II) position.

all doors and tailgate

unlock feature

CONTINUED

To program the Park Unlock mode:

To program the Ignition

Door Locks

Inst

nt
s

Cont

Switch Unlock mode:

2012 Crosstour

Summary of Contents for 2012 Crosstour




















































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Crosstour

Reviews:

Related manuals for 2012 Crosstour

Brands by name

Popular brands

Honda 2012 Crosstour, Owner'S Manual

Search results

Summary of Contents for 2012 Crosstour

Reviews:

Related manuals for 2012 Crosstour

Brands by name

Popular brands