Honda 2010 Civic Hybrid Owner'S Manual Download Page 201

Page: 201 / 374

−

−
−

−

CONTINUED

Bitrate:
32/40/48/56/64/80/96/112/128/
160/192/224/256/320/VBR kbps
(MPEG1)

Sampling frequency:
32/44.1/48 kHz (MPEG1)
16/22.05/24 kHz (MPEG2)

Do not use a device such as a card
reader or hard drive as the device
or your files may be damaged.

Do not connect your USB flash
memory device using a hub.

Do not use an extension cable to
the USB adapter cable equipped
with your vehicle.

Do not keep a USB flash memory
device in the vehicle. Direct
sunlight and high heat will damage
it.

We recommend backing up your
data before playing a USB flash
memory device.

Depending on the type and
number of files, it may take some
time before they begin to play.

Depending on the software the
files were made with, it may not be
possible to play some files, or
display some text data.

The specifications for compatible
MP3 files are:

Maximum layers: 8

Partition: Top partition only

Supported standards:
MPEG1 Audio Layer3
MPEG2 Audio Layer3

Some devices cannot be powered
or charged via the USB adapter. If
this is the case, use the accessory
adapter to supply power to your
device.

You can select the AUX mode by
using the navigation system voice
control buttons, but cannot operate
the play mode functions.

Playing a USB Flash Memory Device (Models with navigation system)

Voice Control System

Fe
a

195

NOTE:

Summary of Contents for 2010 Civic Hybrid























































































































































































































































































































































































Search results

Summary of Contents for 2010 Civic Hybrid

Reviews:

Related manuals for 2010 Civic Hybrid

Brands by name

Popular brands

Honda 2010 Civic Hybrid, Owner'S Manual

Search results

Summary of Contents for 2010 Civic Hybrid

Reviews:

Related manuals for 2010 Civic Hybrid

Brands by name

Popular brands