For added protection, the front seat
belts are equipped with automatic
seat belt tensioners. When activated,
the tensioners immediately tighten
the belts to help hold the driver and
a front passenger in position.
For safety, you should check the
condition of your seat belts regularly.
The tensioners are designed to
activate in any collision severe
enough to cause the front airbags to
deploy.
Pull each belt out fully, and look for
frays, cuts, burns, and wear. Check
that the latches work smoothly and
the belts retract easily. If a belt does
not retract easily, cleaning the belt
may correct the problem (see page
). Any belt that is not in good
condition or working properly will
not provide good protection and
should be replaced as soon as
possible.
Honda provides a limited warranty
on seat belts. See your
booklet for
details.
When the tensioners are activated,
the seat belts will remain tight until
they are unbuckled.
The tensioners can also be activated
during a collision in which the front
airbags
. In this case, the
airbags would not be needed, but the
additional restraint could be helpful.
If a side airbag or side curtain airbag
deploys during a side impact, the
tensioner on that side of the vehicle
will also deploy.
330
Honda
Warranty Information
do not deploy
CONTINUED
Automatic Seat Belt Tensioners
Seat Belt Maintenance
Additional Information About Your Seat Belts
Dr
iv
er
and
P
asseng
er
Saf
e
ty
19
０７／０８／０６ １２：０９：３５ ３１ＴＥ０６００ ００２４
