To load a single CD:
Press and release the LOAD
button.
The disc number icon for an
empty position is highlighted on
the Navigation System display and
the green CD load indicator comes
on. When you see ‘‘LOAd’’ in the
upper display, insert the disc into
the CD slot. Insert it only about
halfway; the drive will pull it in the
rest of the way.
The system will load the CD, and
begin playing it.
When ‘‘LOAd’’ appears again in
the display, insert the next disc
into the CD slot.
Insert the disc into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way. You will see ‘‘BUSY’’ in the
display. The CD load indicator
turns red and blinks as the CD is
loaded.
Press and hold the LOAD button
until you hear a beep and see
‘‘LOAd’’ in the upper display, then
release the button.
To load multiple CDs in one
operation:
For best results when using CD-R
discs, use only high quality discs
labeled for audio use. When
recording a CD-R, the recording
must be closed in order for the disc
to be used by CD players. CD-RW
discs will not work in this unit.
Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded.
If you stop loading CDs before all six
positions are filled, the system will
wait for ten seconds, then stop the
load operation and begin playing the
last CD loaded.
1.
2.
3.
4.
1.
2.
3.
CONTINUED
Audio System
Comf ort and Convenience Features
Loading CDs in the Changer
197
