background image

© 2004 American Honda Motor Co., Inc - All Rights Reserved.

AII 28061 (0409)

7 of 7

20. Plug in the vehicle connectors, and reinstall the

audio panel.

AUDIO PANEL

INSTRUMENT PANEL

VEHICLE
CONNECTOR

21. Reinstall all removed parts.

22. Reconnect the negative cable to the battery.

23. Check the operation of the cassette player and

in-dash CD changer according to the Owner’s
Manuals provided.

24. Put the cassette player and in-dash CD changer

owner’s manuals in the glove box.

25. Reset the clock and radio station presets.

NOTE: Whenever the battery is disconnected, the
driver’s window AUTO function is disabled.

26. Start the engine. Push down on the driver’s

window switch until the window is fully open.

27. Pull up on the driver’s window switch to close

the window completely, then hold the switch for
2 seconds or more.

28. Test the AUTO window function.

29. Do the PCM idle learn procedure.

Make sure all electrical items are turned off.

Start the engine, and let it warm up to its
normal operating temperature (the cooling fans
cycle twice).

Let the engine idle (throttle closed and all
electrical items off) for about 10 minutes.

Summary of Contents for 2003-2005 PILOT








Reviews: