Lights
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
4. Turn on the parking lights and
check that the new bulb is
working.
5. Reinstall the socket. Snap the
cover back in place.
Replacing a Rear Side Marker
Light Bulb
1. The rear side marker light
assembly is behind the rear wheel.
You can reach the light assembly
from the rear wheel housing.
2. Remove the outer three screws
holding the mudguard and pivot
the mudguard out of the way.
3. Remove the socket from the rear
side marker assembly by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket.
Maintenance
Summary of Contents for 2001 CR-V
