Service Station Procedures
SUPPORT ROD
3. Pull the support rod out of its clip
and insert the end into the hole on
the front of the hood around the
center.
To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop.
After closing the hood, make sure it
is securely latched.
Oil Check
Check the engine oil level every time
you fill the vehicle with fuel. Wait a
few minutes after turning the engine
off before you check the oil.
1. Remove the dipstick (orange
handle).
2. Wipe the dipstick with a clean
cloth or paper towel.
CONTINUED
Before Driving
DIPSTICK
Summary of Contents for 1999 CRV
Page 186: ...Required Maintenance Record for Normal and Severe Schedules Maintenance...
Page 262: ...Fuses INTERIOR FUSE BOX CONTINUED Taking Care of the Unexpected Canadian model...
Page 263: ...Fuses UNDER HOOD FUSE BOX ABS FUSE BOX For some types Taking Care of the Unexpected...
Page 269: ...Specifications Technical Information page 272 page 271...