Indicator Lights
Anti-Lock Brake
System (ABS)
Indicator
On cars equipped with ABS
This light normally comes on
when you turn the ignition
ON (II) and goes off after the
engine starts. If it comes on at
any other time, there is a
problem in the ABS. If this
happens, stop the car in a safe
place, and turn off the engine.
Reset the system by restarting
the engine. Watch the ABS light.
If it does not go off, or comes
back on again while driving, take
the car to your dealer to have it
checked. With the light on, your
car still has normal braking
ability but no anti-lock.
Malfunction
Indicator Lamp
See page
167
.
Door and Brake Lamp
Monitor
The appropriate light comes on
in this display if the tailgate or
any door is not closed tightly. If a
brake lamp (except for the
high-mount stoplight) does not
work, the
BRAKE LAMP
indicator comes on when you
push the brake pedal with the
ignition switch ON (II).
A burned out brake light is a
hazard when drivers behind you
cannot tell you are braking. Have
your brake lights repaired right
away.
All the lights in the monitor
display come on for a few
seconds when you turn the
ignition switch ON (II).
Instruments and Controls
A B S
