manualshive.com logo in svg

Honda 1993 Civic Coupe, Owner'S Manual

The Honda 1993 Civic Coupe Owner's Manual is a comprehensive guide for owners of this iconic vehicle. Packed with essential information on maintenance, operation, and troubleshooting, this manual is available for free download from manualshive.com. Get the most out of your Civic Coupe with this invaluable resource.

Share
Download
background image

Engine Oil

Oil and Filter Changes

Always change the oil and filter
according to the time and distance

(miles, kilometers) recommen-
dations on the maintenance
schedule. The oil and filter collect
contaminants that can damage
your engine if they are not
removed regularly.

Changing the oil and filter requires
special tools and access from
underneath the car. The car
should be raised on a service
station-type hydraulic lift for this
service. Unless you have the
knowledge and proper equipment,
you should have this maintenance
done by a skilled mechanic.

1. Run the engine until it reaches

normal operating temperature,
then shut it off.

OIL DRAIN BOLT

2. Open the hood and remove the

oil fill cap. Remove the oil drain
bolt from the bottom of the
engine. Drain the oil into an
appropriate container.

continued

Maintenance

The oil, engine components and
the exhaust system are hot and

can burn you.

Use caution and wear protective

clothing while working in the
engine compartment.

Repeated, prolonged exposure

to used motor oil may cause

skin cancer.

Wash your hands thoroughly
with strong soap as soon as
possible after handling used oil.

Main Menu

Table of Contents

▲

▼

Summary of Contents for 1993 Civic Coupe










































































































































































































Reviews:

No comments

Related manuals for 1993 Civic Coupe

Jeep PATRIOT 2013 Specifications preview
PATRIOT 2013
Brand: Jeep Pages: 5
Jeep PATRIOT 2012 Specifications preview
PATRIOT 2012
Brand: Jeep Pages: 6
Jeep Grand Cherokee SRT 2014 Operating Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 345
Jeep Grand Cherokee 2015 User Manual preview
Grand Cherokee 2015
Brand: Jeep Pages: 236
Jeep Grand Cherokee Quick Manual To Repairs preview
Grand Cherokee
Brand: Jeep Pages: 18
Jeep Grand Cherokee Quick Reference Manual preview
Grand Cherokee
Brand: Jeep Pages: 24
Jeep Compass 2015 Owner'S Manual preview
Compass 2015
Brand: Jeep Pages: 560
Jeep Compass 2013 Owner'S Manual preview
Compass 2013
Brand: Jeep Pages: 525
Jeep Cherokee 2019 User Manual preview
Cherokee 2019
Brand: Jeep Pages: 308
Jeep CHEROKEE 2017 Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 86
Jeep CHEROKEE 2017 Owner'S Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 638
Jeep 2022 CHEROKEE Quick Start Manual preview
2022 CHEROKEE
Brand: Jeep Pages: 9
Jeep 2014 Patriot Service Information preview
2014 Patriot
Brand: Jeep Pages: 51
Jeep Jeep Wrangler Buyer'S Manual preview
Jeep Wrangler
Brand: Jeep Pages: 4
Jeep Jeep Wrangler Owner'S Manual Supplement preview
Jeep Wrangler
Brand: Jeep Pages: 50
Jeep Grand Cherokee SRT 2014 Owner'S Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 118
Jeep 2014 Grand Cherokee Accessories Quick Reference Manual preview
2014 Grand Cherokee
Brand: Jeep Pages: 24
Jeep Grand Cherokee Specfications preview
Grand Cherokee
Brand: Jeep Pages: 8

Brands by name

Popular brands

Load more brands