Child Safety
Using a Seat Belt
Locking Clip
Always use a seat belt locking clip
when you secure a child seat to
your car with a lap/shoulder belt.
This helps prevent the seat from
shifting position or overturning.
A locking clip is usually included
with the child seat. If you need a
clip, contact the seat's
manufacturer or a store that sells
child restraints.
To install a locking clip, do the
following:
1. Place the child restraint in the
desired position. Route the
lap/shoulder belt through the
restraint according to the seat
manufacturer's instructions.
2. Insert the latch plate into the
buckle. Pull on the shoulder
part of the belt to make sure
there is no slack in the lap
portion.
3. Tightly grasp the belt near the
latch plate. Pinch both parts of
the belt together so they won't
slip through the latch plate.
Unbuckle the seat belt.
4. Install the locking clip as
shown. Position the clip as
close as possible to the
latch plate.
5. Insert the latch plate into the
buckle. Push and pull on the
child seat to verify that it is
held firmly in place. If it is not,
repeat these steps until the
restraint is secure.
Using Child Restraints
with Tethers
Your Honda has three attachment
points for tether-style child seats.
Use the dimensions in the above
illustration to locate the
attachment point you want to use.
Cut a 1/2 inch (12.7 mm) diameter
Driver and Passenger Safety
4.2 In
(106.0 mm)
3.2 In
(86.0 mm)
4.2 In
(106.0 mm)
10.4 In
(264.0 mm)
Main Menu
Table of Contents
▲
▼
