Honda 1989 PACIFIC COAST PC800, Owner'S Manual

Page: 79 / 98

FRAME/WHEELS/BRAKES
Specified torque:
Axel bolt: 90 N-m (9.0 kg-m, 65 ft-lb)
Axel pinch bolt: 27 N-m (2.7 kg-m, 20 ft-lb)
•
If a torque wrench was not used for installation, see your
authorized Honda dealer as soon as possible to verify
proper assembly. Improper assembly may lead to loss of
braking capacity.
3. If the feeler gauge cannot be inserted easily, pull the left
fork outward or push inward until the gauge can be inserted
and tighten the axel pinch bolt with the gauge inserted.
4. After tightening, remove the gauge. After installing the
wheel, apply the brake several times, then recheck both
discs for caliper-holder-to-disc clearence. Do not operate
the motorcycle without adequate clearence.
•
Faliure to provide adequate disc-to-caliper-holder clearence
may damage the brake disc and impair braking efficiency.
73