8 of 24
AII 35365 (0708)
© 2007 American Honda Motor Co., Inc. – All Rights Reserved.
24. Remove the vehicle bolt and remove the TPMS
control unit from the vehicle bracket.
25. Route the 12-pin/8-pin/5-pin connector end of the
engine starter harness over the brake pedal bracket
towards the center of the vehicle.
6D18091Y
VEHICLE
BRACKET
VEHICLE
BOLT
TPMS CONTROL UNIT
STEERING
SHAFT
6D1810AY
BRAKE PEDAL
BRACKET
ENGINE STARTER
HARNESS
12-PIN/8-PIN/5-PIN CONNECTOR
STEERING
SHAFT
VEHICLE
BRACKET
26. Route the 12-pin, 8-pin, and 5-pin connector end of
the engine starter harness to the ignition switch.
27. Disconnect the vehicle 5-pin connector from the
ignition switch, and plug the engine starter harness
5-pin connector into the ignition switch.
NOTE: Check that the engine starter harness 5-pin
connector is connected to the vehicle connector and
locked securely. A loose connector can cause
engine to stall.
6D1812DY
12-PIN/8-PIN/5-PIN
CONNECTOR
IGNITION
SWITCH
ENGINE STARTER
HARNESS
5-PIN
CONNECTOR
Unlock connector
Lock connector
Push.
VEHICLE 5-PIN
CONNECTOR
Push.
Pull.
1
2
3
1
2
