BATTERY PACK CHARGER — HBC210W
EN
12
EN
OPERATION
HOW TO CHARGE THE BATTERY PACK
WARNING: Do not use the charger outdoors or expose it to wet or damp
conditions. Water entering the charger will increase the risk of electric shock.
NOTICE:
Lithium-Ion battery packs are shipped partially charged. Before using it
the first time, fully charge the battery pack.
1. Connect the charger to the power supply
(220-240V~ 50Hz).
2. Align the raised ribs of the battery pack with the
mounting slots in the charger; slide the battery
pack down onto the charger (Fig. 2).
3. The charger will communicate with the battery
pack to evaluate the condition of the battery pack.
4. When the battery pack is charging, the green LED
on the charger will flash. The power indicator on
the battery pack will flash in sequence: red, orange and green. The fan in the
charger continuously works to cool the battery pack.
5. When the battery pack is fully charged, the green LED will stop flashing and
will shine green continuously. The power indicator on the battery pack will go
out. Wait until the cooling fan stops, remove the battery pack from the charger
and disconnect the charger from the power supply.
6. The battery pack will fully charge if left on the charger, but it will not
overcharge. If the battery pack remains on the charger for one month or
more, it will perform self-maintenance and drop to 30% charge capacity. If this
occurs, reinstall the battery pack on the charger to recharge it fully.
2
Summary of Contents for HBC210W
Page 113: ...3RDCHE05 00X3RDCHE05...
