BATTERY PACK CHARGER — HBC210W
EN
14
EN
CHARGING A HOT OR COLD BATTERY PACK
If the battery pack is out of the normal temperature range, the red LED will shine
and the green LED will go off. When the battery pack cools down to approximately
57°C or warms to more than 3°C, the charger will automatically begin charging.
DEFECTIVE BATTERY PACK OR CHARGER
If the charger detects a problem, the red LED will begin flashing and the green LED
will go off.
1. If registering as defective, remove and reinsert the battery pack in the charger.
If the LEDs still read “defective” a second time, try charging a different battery
pack.
2. If a different battery pack charges normally, dispose of the defective battery
pack (refer to the instructions in the battery pack manual).
3. If a different battery pack also indicates “defective”, unplug the charger and
wait until the red LED goes out, then reconnect the plug to the power supply. If
the red LED on charger still display defective, the charge may be defective.
WALL-MOUNT HOLES
The charger has hanging holes for convenient storage (Fig. 1). Install screws in the
wall 76mm apart. Use screws sufficiently strong to hold the combined weight of the
charger and battery pack (approximately maximum 3.3kg.)
Summary of Contents for HBC210W
Page 113: ...3RDCHE05 00X3RDCHE05...
