7
To ensure safe operation
Operator Responsibility
Do not operate the grass/weed trimmer with the debris shield, labels,
and other parts removed.
Note that the debris shield is provided for protection of the operator
from the debris that are thrown from the wheeling cutting
attachment (nylon-line cutting heads or cutting blades). Never
operate the grass/weed trimmer with the debris shield removed or
before installing the debris shield in the proper position securely.
Do not mount an incorrect part and do not tamper with the grass/
weed trimmer as it can result in personal injury and/or equipment
damage. Use the cutting attachment that is designated for your
model and application.
Before cranking the engine, be sure to check the cutting attachment
cannot come into contact with the ground or any obstruction. Failure
to do so may result in losing control of the grass/weed trimmer,
because the flexible shaft enables the cutting attachment to move
freely to any direction without your intention.
Do not raise the cutting attachment above your knee height during
operation. You can be hit by the debris thrown by the wheeling
cutting attachment in your eyes and face causing injury.
Start the grass/weed trimmer on a level surface, free of high grass or
obstacle.
Start the engine carefully according to instructions and with hands
and feet well away from the cutting attachment.
Never carry the grass/weed trimmer while the cutting attachment is
turning. Before you carry the grass/weed trimmer, be sure to stop
the engine and confirm the cutting attachment stops its turning. If a
cutting blade is used, cover the cutting blade with the protective
plastic cover while carrying the trimmer.
07/02/22 11:44:44 32VJ6600_011
