Honda Power Products HAEJ Owner'S Manual Download Page 6

5

To ensure safe operation

Operator Responsibility

While operating the grass/weed trimmer, always wear following
protective clothing and protective devices.

Wear adequate clothes with long sleeves and long pants.
The clothes must fit your body and button up or zip up the clothes
securely. Do not leave the sleeves and bottom of the shirt/jacket
loose.
Wear the arm covers, too.
Do not wear the clothes with the tapes, laces and/or ribbons, loose
clothes, necktie, necklace, etc. during operation. They can be
caught in the grass/weed trimmer or on the weed causing injury.
Bind your hair if it is long, and do not let your hair below your
shoulder.

Protective clothing

Protective devices

Goggles
Wear the goggles or other eye protection to protect your eyes
from the debris that is thrown by the wheeling cutting
attachment (nylon-line cutting heads or cutting blades).
Helmet
Wear the helmet to protect your head from the overhead
branches and the falling foreign material.
Face shield
Wear face shield to protect your face from the debris thrown by
the wheeling cutting attachment.
Ear muffs/ear plugs
Wear the ear muff, ear plugs or other hearing protection to
protect your ears from the noise.
Gloves
Wear the gloves to protect your hands.

07/02/22 11:44:27 32VJ6600_009

Summary of Contents for HAEJ











































































Reviews: