homevent SANO PIV WALL, Installation & Maintenance Manual

Page: 9 / 10

ErP Directive - Regulations 1253/2014 - 1254/2014
a) Mark - Homevent
b) Model - SANO PIV WALL
c) SEC class - B
c1) SEC warm climates kWh/m2.a -10.6
c2) SEC average climates kWh/m2.a -26.1
c3) SEC cold climates kWh/m2.a -53.1
Energy label - No
d) Unit typology - Residential - unidirectional
e) Type of drive
- Multi-speed drive
f) Type of Heat Recovery System - Absent
g) Thermal efficiency of heat recovery % N/A
h) Maximum flow rate m3/h 120
i) Electric power input at maximum flow rate W 635
j) Sound power level (L
WA
) dBA 43
k) Reference flow rate m3/h 84
l) Reference pressure difference Pa 50
m) Specific power input (SPI) W/m3/h 0.119
n1) Control factor - 0.65
n2) Control typology - Local demand control
o1) Maximum internal leakage rate % N/A
o2) Maximum external leakage rate % 2
p1) Internal mixing rate % N/A
p2) External mixing rate % N/A
q) Visual filter warning - N/A
r) Instructions to install regulated grilles - check the instruction booklet
s) Internet address for pre/disassembly instructions - www.homevent.co.uk
t) Airflow sensitivity to pressure variations % N/A
u) Indoor/outdoor air tightness m3/h N/A
v1) AEC - Annual electricity consumption - warm climates kWh 0.9
v2) AEC - Annual electricity consumption - average climates kWh 0.9
v3) AEC - Annual electricity consumption - cold climates kWh 0.9
w1) AHS - Annual heating saved - warm climates
kWh 12.8
w2) AHS - Annual heating saved - average climates kWh 28.3
w3) AHS - Annual heating saved - cold climates kWh 55.4