WALL MOUNTING
Before mounting ensure the desired location leaves enough room for access and maintenance. There are multiple mounting configurations make sure
you have decided on the most suitable before drilling any holes.
The back panel can be removed and offered up to the wall ensuring that is level. The mounting hole positions can now be marked and rear duct entry if
required.
Drill the marked holes and insert the suitable wall plugs.
Double check the holes line up with the rear panel and reassemble the unit in the desired configuration.
Attach rear panel to the wall using suitably sized screws.
Affix insulation piece to rear panel.
Lift the unit up and align with the rear panel on the wall.
Secure unit to rear panel by replacing pozi-head screws.
Supply air into hallway.
Rear inlet option.
25/02/2020
PIV WALL IOM
Issue:
Saved Date:
A
25/02/2020
PIV WALL IOM
Issue:
Saved Date:
A
25/02/2020
PIV WALL IOM
Issue:
Saved Date:
A
PENCIL
PENCIL
PENCIL
25/02/2020
PIV WALL IOM
Issue:
Saved Date:
A
