FEATURES: TT1000
1)
Large spindle adaptor
- for use with
records (vinyl) that have a large aperture.
2)
Slip mat
- gives protection between the
record and the platter, and provides an
interface to allow the record to be spun
backwards and forwards while the platter
is turning.
3) Centre spindle -
for locating the centre of
the record.
4) Strobe dots -
indication of the speed of the
platter via strobe light (5).
5) Strobe light.
6) Start/stop button -
for starting and stopping
the platter spinning.
7) Headshell -
holds cartridge at end of the
tonearm.
8) Speed select button -
Change the speed of
the platter between 33 1/3 and 45 RPM.
9) Pitch control slider -
allows the speed of
the platter to be changed by +/-10%, this
allows the change of the BPM of the music
for beat match mixing.
10) Tonearm -
for exact placement of the
headshell onto the record.
11) Tonearm rest -
for resting the tonearm when
not in use, also has a lock to secure the
tonearm when not using the turntable.
12) Cueing lever -
for moving the tonearm
vertically up or down.
13) Anti-skate knob -
to balance the sideways
momement of the tonearm in relation to the
tracking weight. (See page 6 point 3).
14) Counterweight -
allowing the correct
tracking weight to be excerted on the stylus
(See page 6 point 3).
15) Headshell holder -
used when changing
stylus or cartridges to locate the headshell in
position for ease and protection.
16) Lid hinge -
when not using the turntable
place lid on these hdges, lid can be raised
or lowered.
17) Stereo phono outputs -
for connecting to
PHONO input on DJ mixer.
18) GND connection -
Connects to the terminal
earth connection on the rear of the DJ Mixer,
if not connected you will head an audible
buzz through the system.
5
