16.
Power connector
- input socket to connect
9v AC power adaptor supplied.
17.
Power switch
– allows isolation of the power
when the unit is not in use.
18.
Stereo main outputs
- unbalanced RCA
sockets to connect output signal to amplifier.
19.
Channel 1
line inputs
- unbalanced RCA
sockets for Ch1 connecting stereo audio from
line level sources such as CD players, cassettes,
minidiscs etc.
20.
Channel 2
line inputs
- unbalanced RCA
sockets for Ch2 connecting stereo audio from
line level sources such as CD players, cassettes,
minidiscs etc.
21. Channel 1 phono inputs
– RCA sockets to
connect turntable, when these connectors are
not in use, please use shorting plug provided to
ground input (25).
22.
Terminal earth (for turntables Channel 1)
-
Grounding post for turntable connection. Always
FEATURES: MIX 2 REAR PANEL
8
use this connection when using turntables. Your
turntable cable should have a grounding wire, if
this is not connected you will hear a loud buzz
through this channel.
23. Channel 2 phono inputs
– RCA sockets to
connect turntable, when these connectors are
not in use, please use shorting plug provided to
ground input (25)
24.
Terminal earth (for turntables Channel 2)
-
Grounding post for turntable connection. Always
use this connection when using turntables. Your
turntable cable should have a grounding wire, if
this is not connected you will hear a loud buzz
through this channel.
25.
Shorting plugs
- due to the sensitivity of the
phono inputs, it is necessary to ground these
when not in use to avoid unecessary noise on
this channel.
