56
57
Shutter ac-
tuator
Depending on whether teach-in
mode on the actuator was trig-
gered with the ▲- or ▼- but
-
ton, the button to be taught-in is
taught-in as "Open" or "Close",
not as a toggle button.
If a button that was taught-in for an actuator is
taught-in for the same actuator again, the old
assignment is overwritten.
6.1.2 Teaching in to a HomeMatic CCU
Your device can be conveniently
• controlled and configured,
•
connected directly to other devices or
•
used in central control programs
via the HomeMatic software „WebUI“. Therefore, your
shutter contact has to be taught-in to the HomeMatic
Central Control Unit first. New devices are taught-in to
the Central Control Unit via the HomeMatic „WebUI“.
A soon as a component has been taught-in to a
Central Control Unit, it can only be connected to
other components via the CCU.
Each component can only be taught-in to one
Central Control Unit.
To teach-in your device to the CCU, proceed as fol-
lows:
•
Open the „WebUI“ user interface in your browser.
•
Click the „Teach-in devices“ button on the right-
hand side of the screen.
•
To activate teach-in mode, click „Search devices“
in the next window.
•
After a short time, the newly taught-in devices will
appear in the inbox of your software interface. The
button „Inbox (x new devices)“ indicates how many
new devices have been taught-in successfully.
• Now configure the newly taught-in devices in the
inbox as described in the next section.
Configuring newly taught-in devices
Once you have taught-in your actuator to the Home-
Matic Central Control Unit, it will be moved to the in-
box. Here, you must configure the device and its as
-
