36
Start-up
The bore holes
(J)
can be used for installation
with a flush-mounting box.
• Now drill the bore holes.
If you are working with a stone wall, drill the
marked 5 mm holes and insert the plugs supplied.
If you are working with a wooden wall, you can
pre-drill 1.5 mm holes to make screws easier to
insert.
• Use the supplied screws and plugs
(K)
to fasten
the mounting plate to the wall
(see figure 4)
.
• Attach the clip-on frame
(A)
to the mounting
plate.
• Place the remote control
(B)
back into the frame
(see figure 1)
. Make sure that “TOP” and the ar-
rows on the back side point upwards and that the
clips on the mounting plate latch into the open-
ings on the remote control.
5.2.3 Installation in multiple combinations
You can mount the wall-mount remote control with the
attachment frame
(A)
provided or use it with frames of
other manufacturers as well as integrate the remote con-
trol
(B)
into a multi-gang frame. You can flexibly fix the
mounting plate
(F)
to the wall using adhesive strips or
screws. For mounting with multiple combinations, make
