33
Start-up
Homematic IP Access Point first.
To teach-in the wall-mount remote control, please pro-
ceed as follows:
• Open the Homematic IP app on your smartphone.
• Select the menu item
“Teach-in device”
.
• To remove the remote control
(B)
from the frame,
take hold of the sides of the remote control and
pull it out
(see figure 5)
.
• Turn over the remote control.
• Insert two new 1.5 V LR03/micro/AAA batteries
into the battery compartment, making sure that
you insert them the right way round
(see figure 6)
.
Teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button
(D)
shortly
(see figure 7)
.
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED lights up
green. The device is now ready for use.
