74
Operating modes and configuration
6.6.4 Optimum start/stop function
To reach the desired temperature in the room at the de-
fined time you can activate the optimum start/stop func-
tion.
• Select “On” for activating or “OFF” for deactivating
the function in the menu item “OSSF” by turning
the control wheel (
E
) and confirm by pressing the
control wheel briefly.
6.7
Date and time
To set the date and time, please proceed as follows:
• Press and hold down the control wheel (
E
) to
open the configuration menu.
• Select the symbol by turning the control wheel
and confirm by pressing the control wheel briefly.
• Set the year, month, day and hour by turning the
control wheel and confirm by pressing the con-
trol wheel briefly.
6.8
Offset temperature
As the temperature is measured on the wall thermostat,
the temperature distribution can vary throughout a room.
To adjust this, a temperature offset of ±3.5 °C can be set.
If a nominal temperature of e.g. 20 °C is set but the room
presents with only 18 °C, an offset of -2.0 °C needs to
be set. An offset temperature of 0.0° is set in the factory
settings. To adjust the offset temperature, please proceed
as follows:
