61
Start-up
orange. For further information, please refer to
the user manual of the floor heating actuator.
• Press and hold down the system button (
D
) of the
wall thermostat for at least 4 seconds to activate
the pairing mode (
see fig. 5
). The device LED (
D
)
flashes orange.
The device LED (
D
) lights up green to indicate that teach-
ing-in has been successful.
If pairing failed, the device LED (
D
) lights up red. Please
try again.
5.4.2 Teaching-in to the Homematic IP Access Point
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
To teach-in your wall thermostat to the Access Point,
please proceed as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item
“Teach-in device”
.
• After installation, the teach-in mode remains ac-
tivated for 3 minutes.
