62
Operating modes and configuration
If the time has exceeded, you can manually restart
the teach-in mode for another 3 minutes by press-
ing the system button (
D
) briefly
(see figure 5)
.
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED (
D
) lights
up green. The device is now ready for use.
• If the LED (
D
)
lights up red, please try again.
• Allocate the device to a room and give the device
a name.
6
Operating modes and configura-
tion
After installation (and teaching-in), you can individually
adjust the settings to your personal needs via the con-
figuration menu. To do this, proceed as follows:
• Press and hold down the control wheel (
E
) to
open the configuration menu (
see fig. 6
).
• Select the desired symbol by turning the control
wheel and pressing it briefly if you want to adjust
the settings of the following menu items.
