40
Start-up
You can also make individual parameter settings. For exam-
ple, the alarm signals, duration of acoustic alarms and dif-
ferent confirmation signals can be flexibly configured. In this
way, the siren can be adjusted to your personal needs. With
regard to the alarm signals, you can e.g. select between dif-
ferent basic signals for each sensor channel. However, you
can then also select between 2 different speed levels and 4
tone pitches. If an attempt is made to tamper with the device
a tamper signal is send to the Central Control Unit. Using the
Central Control Unit, you can also lock reset via device but-
ton. In this way, the factory settings can be restored only via
the Central Control Unit.
Please refer to the Homematic WebUI Manual for further de-
tails (you can find this in the downloads area of the website
www.homematic.com
).
5.4 Mounting
You can mount the wireless siren to the wall using the
supplied wall mounting bracket. The devices is not
intended for operation wihout wall mounting.
Only insert the device into the wall mounting bracket
after installation.
For mounting the device to the wall, please proceed as fol-
lows:
•
Choose a site for installation.
Make sure that no electricity or similar lines run in the
wall at this location.
