Device LED feedback
50
10 Device LED feedback
10.1 Flashing codes
Various actuator states are indicated by the channel
LEDs flashing:
Flash code
Feedback
Short flashing
Teach mode
Fast flashing
Reset
1 x long, 1 x short
Transmit limit (duty
cycle) reached
1 x long, 2 x short
Device defective
10.2 Operating status display
As soon as a channel’s relay is picked up (i.e.
switched on), the corresponding channel LED lights up
continuously.
Once the actuator has been configured via the central
control unit or a programming tool, the device LED
will indicate other device states in addition to those
already described.
