Start-up
44
Permitted cable cross sections for connecting to the
actuator:
Rigid cable
[mm
2
]
Flexible cable with ferrule [mm
2
]
0.14 – 2.50
0.14 – 1.50
7 Start-up
7.1 Simple operator functions using
integrated buttons
The device features one control button per channel.
You can operate the actuator by means of these but-
tons immediately (no teaching-in required) and check
that the electrical installation has been performed
correctly.
Simply press and release the button to operate
the actuator. Pressing and holding down the
button (for more than 4 seconds) will switch the
relevant channel of the actuator to teach-in
mode.
The relevant channel LED signals the switching status
of the relay:
