Function
35
switching capacity of the relay and the type of
load to be connected) into account before con-
necting a load. All load data relates to resistive
loads.
Devices with electronic power supply units (e.g.
TV or high voltage LED light sources) are no
ohmic loads. They can generate inrush cur-
rents with more than 100 A. Switching such
kind of loads may lead to premature wear of
the actuator.
3 Function
The actuator switches up to 4 connected consumers
with total switching capacity of 5750 W (230 V/25 A)
or 3680 W (230 V/16 A) per channel on the basis of
received radio commands. Commands are transmitted
by actuating buttons or remote controls, or via a soft-
ware interface. It is also possible to control actuators
via taught-in sensors. When an event occurs, the sen-
sors transmit a command (in the same way as a but-
ton). Refer to the manual for the corresponding sensor
for more detailed information.
Mounted on a standard DIN rail within distribution
boards.
