46
47
Start-up
Start-up
for at least 4 seconds until the device LED starts
to flash.
To teach-in to a particular actuator channel,
hold the corresponding channel button down
for at least four seconds.
•
Now put the device that you want to connect to the
switch actuator into teach-in mode. Please follow
the relevant operating manual instructions of the
corresponding device.
If no teach-in operations are carried out,
teach-in mode is exited automatically after 20
seconds. If other devices are also in teach-in
mode, they will be taught-in.
If the actuator has already been taught-in to a
central control unit, it is blocked for direct
teach-in.
6.2.2 Teaching-in to a HomeMatic Central Control
Unit
Your device can be conveniently
• controlled and configured,
•
connected directly to other devices or
•
used in central control unit programs
by using the HomeMatic software "WebUI". There-
fore, your switch actuator has to be taught-in to the
HomeMatic Central Control Unit first. New devices are
taught-in to the central control unit via the HomeMatic
“WebUI”.
As soon as a device has been taught-in to a
central control unit, it can only be connected to
other components via this unit.
Each device can only be taught-in to one central
control unit.
During teach-in, please make sure you
maintain a distance of at least 50 cm between
the HomeMatic devices and the central control
unit.