56
Start-up
> 4 s
• Now put the device you wish to teach-in to the
switch actuator into teach-in mode, according to the
corresponding user manual.
• After teaching-in, the device LED
(B)
of the switch
actuator will stop flashing.
After successfully teaching-in the device you can
switch on and off connected loads e.g. with the
Homematic Remote Control.
If no teach-in operations are carried out,
teach-in mode is exited automatically after 20
seconds. If other devices are also in teach-in
mode, they will be taught-in.
Summary of Contents for HM-LC-Sw1-DR
Page 17: ...Installation 17 S1...
Page 53: ...53 Installation S1...