50
Installation
The maximum line length for connecting a push
button at the terminals S1 is 3 m.
For secure operation, the device has to be
installed in a power distribution panel according
to VDE 0603, DIN 43871 (low-voltage
sub-distribution board), DIN 18015-x. The
installation must be made on a mounting rail
(DIN rail) according to EN50022. Installation
and wiring have to be performed according to
VDE 0100 (VDE 0100-410, VDE 0100-510
etc.). Please consider the technical connection
requirements (TAB) of your energy supplier.
For installation, please proceed as follows:
• Place the Homematic Switch Actuator with the
spring latch onto the DIN rail from above.
Summary of Contents for HM-LC-Sw1-DR
Page 17: ...Installation 17 S1...
Page 53: ...53 Installation S1...