HomeMatic HM-CC-TC, Installation And Operating Manual

Page: 13 / 54

43
If a door-window contact or a window rotary handle sensor is
integrated into the system, the door- or window-position is taken
into account during Vacation/Party mode as well, i.e. if a moni-
tored door or window is open, the window-open temperature is
selected for the control.
Defining Vacation/Party mode:
Use the "Menu" button to switch to Vacation/Party mode. Now
set the time-period for which the function should be executed.
The following 24 hours can be broken down into ½-hour seg-
ments. This breakdown into segments continues on a daily basis.
The selected day shows the time that the controller will switch
back to automatic mode at the beginning of the day at 00:00 hrs..
After defining the desired time-period, confirm your entry with
the "OK" button. Now set the desired temperature for the time-
period of your Vacation/Party mode using the setting dial or
alternatively, select the comfort- or lowered-temperature as the
temperature for your Vacation/Party mode using the "Day/Night"
button.
You can exit Vacation/Party mode at any time using the "Menu"
button.
7.2.4 Center-controlled operation
In this operating mode (display "Cent"), the temperature set
value is defined on the center station and the behavior is identi-
cal to manual mode.
You can stop any operations on the heating controller via the
center station.