HomeMatic HM-CC-TC, Installation And Operating Manual

Page: 10 / 54

40
6.2 Installation
6.2.1 Scope of delivery
s¬ 2OOM¬THERMOSTAT
s¬ 7ALL¬HOLDER
s¬ ¬WOODSCREWS¬¬X¬
s¬ ¬WALLANCHORS¬¬MM
s¬ ¬BATTERIES¬,2¬-IGNON
6.2.2 Mounting the wall holder
Mark the bore holes using the wall holder for mounting the room
thermostats on the wall. Position the wall holder with the semi-
circle formed side to the top and the side with the small hemi-
spherical formed indentation in the top part to the front. Mark a
position in the middle of the elongated holes for the screws.
Use a 6 mm drill bit to drill the fastening holes and use the
provided wall-anchors and screws for fastening. Before you
fully tighten the screws for the wall holder, you can use a level
to make the final alignment adjustments and then tighten the
screws snuggly.