Homematic IP HmIP-SWDM, Mounting Instruction And User Manual

Page: 44 / 56

44
Start-up
5.2 Mounting
Read this entire section before starting to mount
the device.
5.2.1 Selecting a suitable mounting location
• Select a window or door for mounting the
window / door contact.
• Fix one part of the window / door contact
(magnetic contact (I) or electronic unit (K) ) to the
moving part (door or window wing), the other
one at the stationary part (frame) of the window
or door
(see figure 5) .
• Fasten the window / door contact on the side of
the window or door where the handle is located,
in the upper third of the window/door frame
(see
figure 5) (for fastening see “5.2.2 Adhesive strip or
screw mounting” on page 45).
• The magnetic contact can be mounted in a
horizontal or vertical way, left or right to the
electronic unit of the window / door contact.
The electronic unit and the magnetic contact
should be mounted at the same height. Since a
spacer
(E) can be used for the magnetic contact
to raise it, the electronic unit must be mounted
on the higher part of the window.