Homematic IP HmIP-SWDM, Mounting Instruction And User Manual

Page: 45 / 56

45
Start-up
The ideal spacing between the housing edge of
the window / door contact and the magnet
contact should be 5 mm
(see figure 5) .
5.2.2 Adhesive strip or screw mounting
You can use
• the double-sided adhesive strip or
• countersunk head screws
to fix the device to the window/door frame.
Do not yet assemble the magnetic contact before
screw mounting.
Adhesive strip mounting
For mounting the device using the adhesive strips, please
proceed as follows:
• Attach the large double-sided adhesive strip to
the back side of the bracket (A) (see figure 6) and
press the device to the desired position on the
window.
• Place the magnet in the bracket at the back side
and place the back side into the housing of the
magnetic contact
(see figure 7) .
When using the spacer (E) , fasten the smaller ad-
hesive strip at the back side of the spacer (see
figure 6) and attach it to the desired position on
the window. Afterwards, place the magnet con-
tact on to the spacer.