50
Start-up
Please observe the hazard information in section
„2 Hazard information“ on page 42.
Permitted cable cross sections for the cable bushings of
the floor heating actuator are
(see figure 2)
:
Cable bushings
Cable cross section [mm2]
1
(K)
> 8.0
2
(L)
> 5.5
3
(M)
> 3.6
4
(N)
> 4.4
Permitted cable cross sections for connecting to the
connecting terminals
(H)
of the floor heating actuator:
Rigid cable: 0.12 – 0.50 mm
2
6.2
Installation
You can connect the floor heating actuator to a
230 V socket using the supplied mains cable and
thus provide it with power, or you can use the
connection terminal
(H)
to connect 24 V
DC
(SELV).
To install the floor heating actuator, please proceed as
follows:
