Homematic IP HmIP-DRBLI4, Installation And Operating Manual

Page: 52 / 61

52
Operation
Symbol Meaning
Move down
Moved up
Stop
Select button
After selecting a channel via the ‘Channel’ button, you
can select the output channel status by briefly pressing
the ‘Select’ button (
see figure 12 ) (move down - stop
- move up - stop etc.). On each button press, you can
switch to the next status. For the input channels, press-
ing the Select button simulates a short button press for
the selected input channel. Connected actuators can be
switched. This function is not available if the input has
been configured for switch contacts.
If you have not selected a channel, you can select the
following options in the LC display by pressing the Select
button briefly:
• Duty cycle of the blind actuator (in %)
• Temperature in blind actuator (in °C)
• Empty display
External push-button/switch
With external push-buttons/switches, each channel can
be moved up or down directly.