41
Restore factory settings
1x orange and
1 x green
lighting
Test display
Once the test
display has stopped,
you can continue.
10
Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the blind actuator,
please proceed as follows:
• Remove the rocker (if necessary).
• Press and hold down the system button
(A)
for 4 s
with a pointed object (e.g. a pen) until the LED will
start flashing orange quickly
(see figure 5)
.
• Release the system button again.
• Press and hold down the system button again for
4 seconds, until the status LED lights up green.
• Release the system button to finish the procedure.
The device will perform a restart. After the restart, you can
again integrate your device into your Homematic IP system.
Summary of Contents for HmIP-BBL-2
Page 2: ...2 3 4 5 ...
